50mm Termi`s

dst1 · 30-Aug-2005, 17:09

I have just purchase a set of 50mm Termignoni pipes for my 916.
The pipes came off a 996 and come complete with size convertor pipe, straps, springs and the E-prom.
What do I need to do to put these on my 916 and what difference can I expect.

ziggi · 30-Aug-2005, 17:16

You'll need some spanners and allen keys and a chip puller & a little bit of time to line them up straight. I would recommend making sure you have the right chip for 916 with 50mm cans.

Power gain - absolutely nothing in my experience. Sound and look good though.

dst1 · 30-Aug-2005, 18:30

so other than just bolting them on, do I need to get a 916 e-prom to make them work.

Totto · 30-Aug-2005, 19:03

Yes an e-prom suited to 50mm pipes for best results

rcgbob44 · 30-Aug-2005, 23:41

Sounds better than the last night at the proms!

craig996 · 31-Aug-2005, 00:01

If you fit the 50mm termis do you have to chip it ? meaning if you didnt fit a chip would it run ok ?????

ziggi · 31-Aug-2005, 08:29

you can certainly put them on and give a few runs to see what It's like but any more than that might not be good for the engine

748IOM · 31-Aug-2005, 12:38

Wouldn't have thought it would do the engine any problems, its only affecting the fuel/air mixture surely?

Worst case it'll run a bit rough until the mixtures sorted by the replacement chip.

rxtim · 31-Aug-2005, 13:02

The air/fuel mixture is somewhat critical though, you don't want it too lean and going bang.

Totto · 31-Aug-2005, 13:28

E-proms are not expensive , not really worth the risk

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode
Postbit Selector
Use Horizontal Postbit

30-Aug-2005, 17:09	#1
dst1 Registered Forum User Mille Posts: 359 Join Date: Mar 2005 Location: wokingham Mood: thrash the bitch 50mm Termi`s I have just purchase a set of 50mm Termignoni pipes for my 916. The pipes came off a 996 and come complete with size convertor pipe, straps, springs and the E-prom. What do I need to do to put these on my 916 and what difference can I expect. Reply

30-Aug-2005, 17:16	#2
ziggi Registered Forum User 888 at Last !!! Posts: 957 Join Date: Jan 2002 Location: Horsham, West Sussex You'll need some spanners and allen keys and a chip puller & a little bit of time to line them up straight. I would recommend making sure you have the right chip for 916 with 50mm cans. Power gain - absolutely nothing in my experience. Sound and look good though. Reply

30-Aug-2005, 18:30	#3
dst1 Registered Forum User Mille Posts: 359 Join Date: Mar 2005 Location: wokingham Mood: thrash the bitch so other than just bolting them on, do I need to get a 916 e-prom to make them work. Reply

30-Aug-2005, 19:03	#4
Totto Registered Forum User Big Twin Posts: 1,262 Join Date: Jul 2002 Location: Northern Ireland Mood: Not so broke any more !!!!!!!! Yes an e-prom suited to 50mm pipes for best results Reply

30-Aug-2005, 23:41	#5
rcgbob44 Registered Forum User BSB Star Bikes: 998s, Jota, KTM 690 Duke Posts: 5,990 Join Date: May 2003 Location: Coulsdon, Surrey...........and hopefully Germany at some point in the future. Mood: My Jota goes rumpety rump! & I have my wife exactly where she wants me! Sounds better than the last night at the proms! Reply

31-Aug-2005, 00:01	#6
craig996 Registered Forum User Posts: 9 Join Date: Aug 2005 Location: Padded Cell If you fit the 50mm termis do you have to chip it ? meaning if you didnt fit a chip would it run ok ????? Reply

31-Aug-2005, 08:29	#7
ziggi Registered Forum User 888 at Last !!! Posts: 957 Join Date: Jan 2002 Location: Horsham, West Sussex you can certainly put them on and give a few runs to see what It's like but any more than that might not be good for the engine Reply

31-Aug-2005, 12:38	#8
748IOM Registered Forum User 500SD Posts: 508 Join Date: Jul 2005 Location: Isle of Man Mood: Yellow!! Wouldn't have thought it would do the engine any problems, its only affecting the fuel/air mixture surely? Worst case it'll run a bit rough until the mixtures sorted by the replacement chip. Reply

31-Aug-2005, 13:02	#9
rxtim Registered Forum User Montjuic Posts: 73 Join Date: Jul 2005 Location: Poole The air/fuel mixture is somewhat critical though, you don't want it too lean and going bang. Reply

31-Aug-2005, 13:28	#10
Totto Registered Forum User Big Twin Posts: 1,262 Join Date: Jul 2002 Location: Northern Ireland Mood: Not so broke any more !!!!!!!! E-proms are not expensive , not really worth the risk Reply