Ducati/datatool alarm

Douglas · 31-Aug-2005, 22:01

Hello

I am trying to fit a Ducati (Datatool Evo plus) alarm to my 600ss. I think that is the alarm fitted by Ducati.

Does anyone have any instalation infortmation. I have identified how it plugs into the bike loom, but wonder about the various flying leads. I assume one plugs into each front indicator. What do the others plug into?

Any snipperts of info welcome!

Thanks

Douglas

weeveetwin · 31-Aug-2005, 23:50

...and to each rear indicator! Also, one goes to the little flashing red warning light fitted 'tween the clocks.

(Mine's just thrown a 'wobbly' so I'll be delving deeper into its workings at the weekend).

Douglas · 01-Sep-2005, 00:18

Any poiners as to which wires connect to the rear indicators and the LED?

Rushjob · 01-Sep-2005, 00:19

This is from my Veto Evo destructions from my ST2....

Left hand indicator & one alarm earth ( two wires 2.8mm spade terminals,1 purple tagged ) to the left hand indicator on the bike - the purple tagged one to the white/black wire on the bike, the alarm black wire to black on the bike.

Right hand indicator ( 2.8mm spade terminal, 1 purple tagged on its own ) to the right hand indicator on the bike - the purple tagged one to the white/green wire on the bike.

2 green tagged wires - programming / accessory loop
1 yellow/green tagged wire - accessory siren / pager.

If you need a copy of the instructions... drop me a line.

HTH

Cheers

Andy

Alarm LED - identified by bullet connectors - connect to the led as appropriate.

Power wire - 6mm ring terminal - to positive terminal on battery.

[Edited on 31-8-2005 by Rushjob]

Rushjob · 01-Sep-2005, 00:21

None go to the rear indicators on the ST - it doesn't matter anyway whether you hook in to the front or rear as the front & rear indicators are already connected in the bike wiring loom!

Douglas · 17-Sep-2005, 11:30

Thanks for the help. Unfortunately I wasnt able to work it out with sufficient confidence to wire it up to the bike.

However I have just got a copy of the alarm fitting instructions from Datatool. So if they are successful, I will report back!

Douglas · 01-Oct-2005, 07:28

Hullo. I have now successfully fitted the alarm, and it works fine. It was fairly straightforward. So if anyone needs a acopy of the instructions, please feel free to get in touch.

Regards

douglas

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode
Postbit Selector
Use Horizontal Postbit

31-Aug-2005, 23:50	#2
weeveetwin Registered Forum User 500SD Posts: 779 Join Date: Apr 2004 Location: Wearside ...and to each rear indicator! Also, one goes to the little flashing red warning light fitted 'tween the clocks. (Mine's just thrown a 'wobbly' so I'll be delving deeper into its workings at the weekend). Reply

01-Sep-2005, 00:18	#3
Douglas Registered Forum User Mille Posts: 118 Join Date: Jul 2005 Any poiners as to which wires connect to the rear indicators and the LED? Reply

01-Sep-2005, 00:21	#5
Rushjob Registered Forum User Big Twin Posts: 1,802 Join Date: Apr 2002 Location: Lincs Mood: :-) None go to the rear indicators on the ST - it doesn't matter anyway whether you hook in to the front or rear as the front & rear indicators are already connected in the bike wiring loom! Reply

17-Sep-2005, 11:30	#6
Douglas Registered Forum User Mille Posts: 118 Join Date: Jul 2005 Thanks for the help. Unfortunately I wasnt able to work it out with sufficient confidence to wire it up to the bike. However I have just got a copy of the alarm fitting instructions from Datatool. So if they are successful, I will report back! Reply

01-Oct-2005, 07:28	#7
Douglas Registered Forum User Mille Posts: 118 Join Date: Jul 2005 Hullo. I have now successfully fitted the alarm, and it works fine. It was fairly straightforward. So if anyone needs a acopy of the instructions, please feel free to get in touch. Regards douglas Reply