Torque applied, new clutch basket

keith_mann1959 · 06-Sep-2005, 09:24

I have a new 48 tooth clutch basket to fit and a torque wrench that only goes to 40 lbs.
I understand there is a reliable way of measuring the multiplied force if i use a length of scaffold pole to increase my leverage.
Any ideas ?

Mr_S · 06-Sep-2005, 12:04

The torque wrench will still click at 40lbs regardless of how long the bar is.

doogalman · 06-Sep-2005, 19:09

Just buy a torque wrench that goes that high. It's allways usefull at a later date.

HW · 06-Sep-2005, 20:55

I bought a "large" torque wrench from Argos a few years ago, on the grounds that if I was looking at the high end torque then it wouldn;t amtter TOO much if it was inaccurate. It wasn't too much as I recall, and very useful for getting the wheel nuts done uptight enough!. I paid more for a 0-60 vernier scale one from Halfords though.

FiscusFish · 06-Sep-2005, 21:35

http://www.autoexpress.co.uk/product..._wrenches.html £24 for the test winner... Gotta be better than using something to extend the torque wrench head (not the handle) and making a calculation?

doogalman · 08-Sep-2005, 19:43

I picked mine up at an autojumble for £8. As said above , better than a bodged effort. Used it loads since.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode
Postbit Selector
Use Horizontal Postbit

06-Sep-2005, 12:04	#2
Mr_S Registered Forum User Big Twin Posts: 1,324 Join Date: Mar 2004 Location: Gosport The torque wrench will still click at 40lbs regardless of how long the bar is. Reply

06-Sep-2005, 19:09	#3
doogalman Registered Forum User WSB Hero Posts: 9,937 Join Date: May 2003 Location: Enjoy as much time without work Mood: No point in working long hours to die early Just buy a torque wrench that goes that high. It's allways usefull at a later date. Reply

06-Sep-2005, 21:35	#5
FiscusFish Registered Forum User 500SD Posts: 782 Join Date: Feb 2004 Location: Welling Mood: Must fix Superlight... Must fix Superlight... http://www.autoexpress.co.uk/product..._wrenches.html £24 for the test winner... Gotta be better than using something to extend the torque wrench head (not the handle) and making a calculation? Reply

08-Sep-2005, 19:43	#6
doogalman Registered Forum User WSB Hero Posts: 9,937 Join Date: May 2003 Location: Enjoy as much time without work Mood: No point in working long hours to die early I picked mine up at an autojumble for £8. As said above , better than a bodged effort. Used it loads since. Reply