45mm termis and eprom info....please

craig996 · 12-Sep-2005, 22:25

Just fitted some 45mm termis and an eprom chip to my 996 went out for a ride on it and what a difference it made from factory spec but i did notice a slight stutter in lower rev range is this because it will need mapping with the new chip.
How often will i have to have the bike remapped with the new chip and will it need doing now i have fitted it ????
Has anybody else found that termis are a pain in the arse to fit ???

nelly · 13-Sep-2005, 00:04

It won't need "mapping" as such, just that the basic settings need checking and the idle CO needs adjusting.
This should be done at every service to keep everything tip top

Shazaam! · 13-Sep-2005, 00:32

Common problem with dual injector 996's ...

http://ducatisportingclub.com/xmb/vi...ge=1#pid186093

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode
Postbit Selector
Use Horizontal Postbit

13-Sep-2005, 00:04	#2
nelly Registered Forum User Ducati Corse Posts: 3,134 Join Date: Jan 2002 Location: notts Mood: Bloo and Yellow.. and Red now ;) It won't need "mapping" as such, just that the basic settings need checking and the idle CO needs adjusting. This should be done at every service to keep everything tip top Reply

13-Sep-2005, 00:32	#3
Shazaam! DSC Club Member Big Twin Posts: 1,167 Join Date: Nov 2001 Location: San Diego, CA Common problem with dual injector 996's ... http://ducatisportingclub.com/xmb/vi...ge=1#pid186093 Reply