Ducati Sporting Club UK > Model Specific - Discussion, Technical Problems and Help > Supersports: SS / SuperSport / Supersport 950 > Half Fairing

[900SL Pete]

I would like to buy a half fairing and Monster Belly Pan. Anybody any idea where to get these items, the other alternative is to buy second hand fairing lowers for a 900, 750,600 superdport pre 97. amd cut them down??

[Iconic944ss]

I think you might find something here:

http://www.ricambi-weiss.de/shop/cat...products_id=24

Seem to be good guys too - much better english than my German

Frank

[Iconic944ss]

Or a half here

http://cgi.ebay.co.uk/DUCATI-900SS-9...QQcmdZViewItem

[900SL Pete]

Thanks Frank however I think my German is not that good and the fairing is the right side only. But this is the kind of thing anybody any thing else??

[Iconic944ss]

I meant to say that their English is close to fluent - just drop them a line, good guys.

Frank

[phil_h]

left side half fairing
http://www.ricambi-weiss.de/shop/cat...products_id=76

right side
http://www.ricambi-weiss.de/shop/cat...products_id=77

Actually, I quite fancy some of these for the racer.
Let me know if you want to get some, and we can try and split the postage or something.

[Edited on 13-11-2005 by phil_h]

[Iconic944ss]

More to try......

http://www.diopa.com/shop/shop.html

Look under Superlight >91

[Iconic944ss]

Ta Daaaa....

http://www.airtech-streamlining.com/euroz/ss.htm

[900SL Pete]

Thanks Frank, you really do spend a lot of time looking at this stuff, I like the German stuff they certainly have alot to choose from.
Next thing I will need to know and, I have seen these threads before is, where can I get the right colour red to paint these??

I will give one of these a call!

[FiscusFish]

As the others have said Ricambi are easy to deal with.

I have a set of their half fairings on my SL. Quality isn't great but they were cheap and have painted up reasonably well, especially since the bike's mostly used on the track these days.

Also have a DP carbon belly pan from a Monster fitted (but not shown in the pic). Bought it cheap off eBay a while back. Needed modifying a little at the front for the oil cooler hoses (Monsters have hi level coolers unlike earlier SSs) but nothing ten minutes with a Dremel couldn't handle.