A bargain if you can spell Ducati??

m1keyp · 17-Dec-2005, 17:34

I found this having accidentally miss spelled Ducati

http://cgi.ebay.co.uk/Ducatti-ST4-ex...cm dZViewItem

mark749s · 20-Dec-2005, 22:44

how are you spelling that then!!!!!

Derek · 21-Dec-2005, 09:41

Thanks for the tip off m1keyp. I'm now the owner of a nice (I hope) pair of Sil Motor cans.

rockhopper · 21-Dec-2005, 10:01

I've got a funny feeling in my water that they are actually cans for an ST2.

Derek · 21-Dec-2005, 10:08

The guy was also selling a pair of panniers which he described as from an ST4 so the cans are almost certainly from the same bike. I'm pretty sure that the ST2 cans will fit anyway and if they don't I can always sell them again.

rockhopper · 21-Dec-2005, 10:36

St4 and ST4S cans have a larger diameter pipe where they join the collector box. There is a very obvious flare of the pipe at the end. These cans appear to be the same diameter all the way to the end. Its difficult to see as its not a fantastic picture on ebay so i might be totally wrong!

You could make up an adapter if they are wrong though.

Here is a pic of my spare ST4 cans for comparison.

Derek · 21-Dec-2005, 13:24

I see what you mean. Ah well, I'll just have see what turns up.

Rushjob · 21-Dec-2005, 21:12

Check the ad again Paul
He says they were on an ST4 but thinks ( incorrectly ) they'd fit a 2 or 3....The ends look exactly the same as my Sils
I wouldn't worry Derek.

[Edited on 21-12-2005 by Rushjob]

Derek · 22-Dec-2005, 09:48

Quote:

Originally posted by Rushjob
....The ends look exactly the same as my Sils
I wouldn't worry Derek.

[Edited on 21-12-2005 by Rushjob]

Well that's a relief.

I was quite happy until Rockhopper sowed the seeds of doubt.

Derek · 22-Dec-2005, 11:47

Rushjob, as a matter of interest did you find it necessary to alter the fueling?

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode
Postbit Selector
Use Horizontal Postbit

17-Dec-2005, 17:34	#1
m1keyp Registered Forum User 500SD Posts: 714 Join Date: Mar 2004 Location: Cambridgeshire A bargain if you can spell Ducati?? I found this having accidentally miss spelled Ducati http://cgi.ebay.co.uk/Ducatti-ST4-ex...cm dZViewItem Reply

20-Dec-2005, 22:44	#2
mark749s Registered Forum User Mille Posts: 198 Join Date: Aug 2005 Location: Abergavenny how are you spelling that then!!!!! Reply

21-Dec-2005, 09:41	#3
Derek Registered Forum User GTL Bikes: ST4s ABS Posts: 480 Join Date: Aug 2003 Location: Tayside, Scotland Thanks for the tip off m1keyp. I'm now the owner of a nice (I hope) pair of Sil Motor cans. Reply

21-Dec-2005, 10:01	#4
rockhopper Registered Forum User Ducati Corse Posts: 3,367 Join Date: Jul 2001 Location: Pinxton I've got a funny feeling in my water that they are actually cans for an ST2. Reply

21-Dec-2005, 10:08	#5
Derek Registered Forum User GTL Bikes: ST4s ABS Posts: 480 Join Date: Aug 2003 Location: Tayside, Scotland The guy was also selling a pair of panniers which he described as from an ST4 so the cans are almost certainly from the same bike. I'm pretty sure that the ST2 cans will fit anyway and if they don't I can always sell them again. Reply

21-Dec-2005, 13:24	#7
Derek Registered Forum User GTL Bikes: ST4s ABS Posts: 480 Join Date: Aug 2003 Location: Tayside, Scotland I see what you mean. Ah well, I'll just have see what turns up. Reply

21-Dec-2005, 21:12	#8
Rushjob Registered Forum User Big Twin Posts: 1,802 Join Date: Apr 2002 Location: Lincs Mood: :-) Check the ad again Paul He says they were on an ST4 but thinks ( incorrectly ) they'd fit a 2 or 3....The ends look exactly the same as my Sils I wouldn't worry Derek. [Edited on 21-12-2005 by Rushjob] Reply

22-Dec-2005, 11:47	#10
Derek Registered Forum User GTL Bikes: ST4s ABS Posts: 480 Join Date: Aug 2003 Location: Tayside, Scotland Rushjob, as a matter of interest did you find it necessary to alter the fueling? Reply