power commander maps

deej · 29-Dec-2005, 21:40

does anyone have a power commander map that they would recommend using on a 853 with 50mm termi's so that i can fit the pc3 and then ride upto my dyno shop without doing any harm to the engine

cheers

deej

phil_h · 30-Dec-2005, 10:59

If youa re worried, just use a map for a full-race system, cos it will supply the most fuel.
If you dont cane it, it wont matter anyway.

Chrisiball · 30-Dec-2005, 12:11

Just leave it unplugged at the airbox connection until you get to the dyno centre! Only a 5 min job to pull the fairing and swop the plugs over!

deej · 30-Dec-2005, 22:57

good point chris and a good suggestion from you phil

cheers guys

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode
Postbit Selector
Use Horizontal Postbit

30-Dec-2005, 10:59	#2
phil_h Registered Forum User Ducati Meccanica Posts: 2,527 Join Date: Sep 2004 Location: Pulborough, W. Sussex Mood: 900,900,851,750,750,750, 600,600,450,350,350,250 If youa re worried, just use a map for a full-race system, cos it will supply the most fuel. If you dont cane it, it wont matter anyway. Reply

30-Dec-2005, 12:11	#3
Chrisiball Registered Forum User 500SD Posts: 529 Join Date: May 2004 Location: Scunthorpe, Lincs Mood: Come on spring!!! Or Just leave it unplugged at the airbox connection until you get to the dyno centre! Only a 5 min job to pull the fairing and swop the plugs over! Reply

30-Dec-2005, 22:57	#4
deej Registered Forum User Ducati Meccanica Bikes: have owned 748/853/916/749/853R/748/848 not sure whats next... Posts: 2,242 Join Date: Sep 2004 Location: deep sunny cornwall Mood: excited about the changes made to averysmotorcycles.co.uk that are coming up good point chris and a good suggestion from you phil cheers guys Reply