Rear Shock - Will a '99 583 fit a '05 620ie?

domski · 17-Jan-2006, 16:53

I have a Nitron race shock fitted in a 1999 M600, will it fit in to a 2005 620ie Monster?

AK · 17-Jan-2006, 16:59

This was to fit a loop arm susp - and will have a remote reservoir?
Dom - as long as the pre-load length is the same, I would think so.

AK

skidlids · 17-Jan-2006, 16:59

If its about 305mm it may

domski · 17-Jan-2006, 18:24

Thanks guys, I better ask Louigi to get his ruler out

Chaz · 17-Jan-2006, 18:48

Quote:

Originally posted by domski
I have a Nitron race shock fitted in a 1999 M600, will it fit in to a 2005 620ie Monster?

I hope so or it will have tobe the one off my pogo stick.

domski · 17-Jan-2006, 18:52

Go and measure yours then. Sheesh, do I have to do everything???

Also, whilst your other bike is in bits, how long is that shock?

Throw me a fricking bone

Chaz · 17-Jan-2006, 19:00

The ohlins off the 916 is 310 but i don't think it will fit.

phil_h · 17-Jan-2006, 19:13

If you look on the ohlins website you can get all the shock dimensions.

The shock-mountings are different for the 2 different monster swingarms too.
It lists
305mm for 620 with an eye each end
330mm for 600 with an eye at the top and a fork at the bottom

domski · 17-Jan-2006, 19:14

Bugger!!

skidlids · 17-Jan-2006, 19:21

and a 916/996/998 Ohlins DU-143 is 305mm with a 71mm stroke

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode
Postbit Selector
Use Horizontal Postbit

17-Jan-2006, 16:53	#1
domski DSC Club Member WSB Hero Posts: 9,994 Join Date: Jan 2005 Location: Devon Rear Shock - Will a \'99 583 fit a \'05 620ie? I have a Nitron race shock fitted in a 1999 M600, will it fit in to a 2005 620ie Monster? Reply

17-Jan-2006, 16:59	#2
AK DSC Club Member BSB Star Posts: 6,367 Join Date: Jan 2003 Location: the garage Mood: www.knightroadraceteam.co.uk This was to fit a loop arm susp - and will have a remote reservoir? Dom - as long as the pre-load length is the same, I would think so. AK Reply

17-Jan-2006, 16:59	#3
skidlids MotoGP God Posts: 18,275 Join Date: Apr 2002 Location: Oxford Mood: Its ONLY a Bike Club If its about 305mm it may Reply

17-Jan-2006, 18:24	#4
domski DSC Club Member WSB Hero Posts: 9,994 Join Date: Jan 2005 Location: Devon Thanks guys, I better ask Louigi to get his ruler out Reply

17-Jan-2006, 18:52	#6
domski DSC Club Member WSB Hero Posts: 9,994 Join Date: Jan 2005 Location: Devon Go and measure yours then. Sheesh, do I have to do everything??? Also, whilst your other bike is in bits, how long is that shock? Throw me a fricking bone Reply

17-Jan-2006, 19:00	#7
Chaz Registered Forum User Ducati Corse Bikes: 916 Strada Posts: 3,844 Join Date: Jul 2003 Location: At some track or another:) Mood: www.od2racing.co.uk The ohlins off the 916 is 310 but i don't think it will fit. Reply

17-Jan-2006, 19:14	#9
domski DSC Club Member WSB Hero Posts: 9,994 Join Date: Jan 2005 Location: Devon Bugger!! Reply

17-Jan-2006, 19:21	#10
skidlids MotoGP God Posts: 18,275 Join Date: Apr 2002 Location: Oxford Mood: Its ONLY a Bike Club and a 916/996/998 Ohlins DU-143 is 305mm with a 71mm stroke Reply