carbon 50m termi's

joe748 · 29-Jan-2006, 20:13

was wondering if anyone could tell me if these will do my 2002 998bp? i know the cans will fit with a 45/50 link pipe but willl the ECU do the job?

carbon termi's

cheers,
joe

[Edited on 29-1-2006 by joe748]

Nigel C · 29-Jan-2006, 20:40

Pipes will fit fine though the description of the chip is a bit vague you would be better off getting a chip specifically for your bike from JHP or similar they are not expensive i'd go for a JHP chip it worked brilliantly on my 748 with 50mm pipes and only cost £25

joe748 · 29-Jan-2006, 20:58

i'm told the 998 ECU is sealed and there for can not take a chip?? was thinking about a power commander but seen the cans and ECU on ebay and thought it would be cheaper

joe

Nigel C · 29-Jan-2006, 21:57

Ah mine was an "old" 1999 model so you may be right about a sealed ecu

Nattyboy · 29-Jan-2006, 22:14

ECU would fuel incorrectly for your bike I think you'll find mate...

If its of interest..I can do a set of brand new 'approved' 50mm termis...a compromise in noise between full on race and legal - for £350 (dealer price £746). I am told it would be very easy to remove the baffles if you wanted full on race..

Cheers
Nat

[Edited on 29-1-2006 by Nattyboy]

CipiVTS · 05-Feb-2006, 10:08

The 998 has the U59 ECU which needs a different motherboard add on. I checked at Ultimap's site and it costs a lot

joe748 · 05-Feb-2006, 17:10

so does anyone know wot my options are??

cheers,
joe

skidlids · 05-Feb-2006, 18:05

I run my 998BP engned Hybrid with a full 50mm 998S system, I have tried 3 different ECUs by them selves and none have been ideal, choices are either a Power commander or a DB tronics fueling unit, of which I have two and one is for sale.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode
Postbit Selector
Use Horizontal Postbit

29-Jan-2006, 20:13	#1
joe748 Registered Forum User Montjuic Posts: 61 Join Date: Aug 2003 Location: belfast carbon 50m termi\'s was wondering if anyone could tell me if these will do my 2002 998bp? i know the cans will fit with a 45/50 link pipe but willl the ECU do the job? carbon termi's cheers, joe [Edited on 29-1-2006 by joe748] Reply

29-Jan-2006, 20:58	#3
joe748 Registered Forum User Montjuic Posts: 61 Join Date: Aug 2003 Location: belfast i'm told the 998 ECU is sealed and there for can not take a chip?? was thinking about a power commander but seen the cans and ECU on ebay and thought it would be cheaper joe Reply

29-Jan-2006, 21:57	#4
Nigel C Registered Forum User Big Twin Posts: 1,710 Join Date: Aug 2002 Location: Worthing Sussex Mood: happy bike passed MOT Ah mine was an "old" 1999 model so you may be right about a sealed ecu Reply

05-Feb-2006, 10:08	#6
CipiVTS Registered Forum User Mille Posts: 109 Join Date: Nov 2005 The 998 has the U59 ECU which needs a different motherboard add on. I checked at Ultimap's site and it costs a lot Reply

05-Feb-2006, 17:10	#7
joe748 Registered Forum User Montjuic Posts: 61 Join Date: Aug 2003 Location: belfast so does anyone know wot my options are?? cheers, joe Reply

05-Feb-2006, 18:05	#8
skidlids MotoGP God Posts: 18,275 Join Date: Apr 2002 Location: Oxford Mood: Its ONLY a Bike Club I run my 998BP engned Hybrid with a full 50mm 998S system, I have tried 3 different ECUs by them selves and none have been ideal, choices are either a Power commander or a DB tronics fueling unit, of which I have two and one is for sale. Reply