Help with socket size

Nattyboy · 04-Feb-2006, 14:35

Can somene confirm the socket size for the rear nut that holds the hub in place, and also the torque setting to do it back up..just off in to town in a bit to buy a couple of new tools.

ta!

Nat

Duke2BSteve · 04-Feb-2006, 14:40

Nat i think that side is 41mm ?? maybe wrong though, i know the other side is 46mm?? hows it going mate, just back from job.

Chrisiball · 04-Feb-2006, 16:21

Yep the sprocket side is 41mm,

nelly · 04-Feb-2006, 18:28

41mm and 157Nm

Carbon749 · 04-Feb-2006, 18:30

41mm and 46mm ..

Nattyboy · 04-Feb-2006, 18:40

Thanks guys...nipped into Halfrauds..."ooohh..we dont do them that big sir.."..

Guess i'll have to track down a tool supplier in the week..

Nat

Carbon749 · 04-Feb-2006, 18:43

Thought a few people on here said that Halfords 3/4" pro range went up to 46mm.

They also crop up on e-bay ... 1 or 2 very expensive, odd bargain if you have a good look.

nelly · 04-Feb-2006, 18:45

oh yeah, forgot...................... Halfords don't sel them. You'll need to find a tool supplier

sorry Nat, couldn't resist. End of week wind down

Nattyboy · 04-Feb-2006, 18:46

Quote:

Originally posted by nelly
oh yeah, forgot...................... Halfords don't sel them. You'll need to find a tool supplier

sorry Nat, couldn't resist. End of week wind down

Your not helping young man...:P - You been at the stellas already ??!!

Nat

Duke2BSteve · 04-Feb-2006, 18:52

Nat go to Beesleys tools, its just across the road from Kwik fit, and the Shell garage, I got the 46mm in there and the 3/4 to 1/2 adaptor, so you can borrow either of them if required. They stock all the over sized range in the shop, so don't have to order....

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode
Postbit Selector
Use Horizontal Postbit

04-Feb-2006, 14:35	#1
Nattyboy Registered Forum User Ducati in my Blood Posts: 4,181 Join Date: Dec 2003 Location: Swindon, Wilts Mood: Back down to 3 :>( Help with socket size Can somene confirm the socket size for the rear nut that holds the hub in place, and also the torque setting to do it back up..just off in to town in a bit to buy a couple of new tools. ta! Nat Reply

04-Feb-2006, 14:40	#2
Duke2BSteve Registered Forum User Mille Posts: 391 Join Date: May 2005 Location: Swindon Nat i think that side is 41mm ?? maybe wrong though, i know the other side is 46mm?? hows it going mate, just back from job. Reply

04-Feb-2006, 16:21	#3
Chrisiball Registered Forum User 500SD Posts: 529 Join Date: May 2004 Location: Scunthorpe, Lincs Mood: Come on spring!!! nat Yep the sprocket side is 41mm, Reply

04-Feb-2006, 18:28	#4
nelly Registered Forum User Ducati Corse Posts: 3,134 Join Date: Jan 2002 Location: notts Mood: Bloo and Yellow.. and Red now ;) 41mm and 157Nm Reply

04-Feb-2006, 18:30	#5
Carbon749 Registered Forum User Big Twin Posts: 1,956 Join Date: Mar 2005 Location: Normally in my own little world Mood: I own a flame thrower 41mm and 46mm .. Reply

04-Feb-2006, 18:40	#6
Nattyboy Registered Forum User Ducati in my Blood Posts: 4,181 Join Date: Dec 2003 Location: Swindon, Wilts Mood: Back down to 3 :>( Thanks guys...nipped into Halfrauds..."ooohh..we dont do them that big sir..".. Guess i'll have to track down a tool supplier in the week.. Nat Reply

04-Feb-2006, 18:43	#7
Carbon749 Registered Forum User Big Twin Posts: 1,956 Join Date: Mar 2005 Location: Normally in my own little world Mood: I own a flame thrower Thought a few people on here said that Halfords 3/4" pro range went up to 46mm. They also crop up on e-bay ... 1 or 2 very expensive, odd bargain if you have a good look. Reply

04-Feb-2006, 18:45	#8
nelly Registered Forum User Ducati Corse Posts: 3,134 Join Date: Jan 2002 Location: notts Mood: Bloo and Yellow.. and Red now ;) oh yeah, forgot...................... Halfords don't sel them. You'll need to find a tool supplier sorry Nat, couldn't resist. End of week wind down Reply

04-Feb-2006, 18:52	#10
Duke2BSteve Registered Forum User Mille Posts: 391 Join Date: May 2005 Location: Swindon Nat go to Beesleys tools, its just across the road from Kwik fit, and the Shell garage, I got the 46mm in there and the 3/4 to 1/2 adaptor, so you can borrow either of them if required. They stock all the over sized range in the shop, so don't have to order.... Reply