St4s Engines

Rob B · 31-Aug-2003, 17:29

Does antone know how to tell the ST4s engine from the plain 4? I am looking around for a 4s engine and by the time I get to the breakers I am sure they'll tell me anything they want. Did the engine numbers change or have they have a particular identifying clue in the number?

Thanks, Rob

Rushjob · 31-Aug-2003, 20:06

Rob

The engine no should read ZDM996W4B -------

Cheers

Andy

rockhopper · 31-Aug-2003, 21:11

The engine itself is painted a light grey colour instead of the dark colour on the St4 and ST2. The capacity is also usually stamped on the crank cases somewhere.

How did you get on with CMC Andy?

Paul.

Rushjob · 31-Aug-2003, 22:03

I should know in the morning!

Rob B · 01-Sep-2003, 11:12

Rob B · 01-Sep-2003, 21:26

Andy,

Thanks for your engine model designation response. I'm going to have a look at a motor on Weds and was wondering if you know what the other (st2, st4) engine type codes are.

Thanks, Rob

fatduke11111 · 01-Sep-2003, 21:56

Rob:-

Here is a really good source of info for the ST2 / 4 / (some) 4s stuff - it may be worth looking at...
http://www.bike-gizmos.com/DucatiSTFAQ.html

Cheers

Paul

Rushjob · 01-Sep-2003, 22:32

Sorry Rob, sold the ST2 so I don't have an engine to look at! Wouldn't be too suprised if they had 944 / 916 in the number though.

Paul- the hiccup is now in the process of being sorted to my satisfaction after a few more "exchanges of diametrically opposed viewpoints" and I didn't have to shout either!

[Edited on 1-9-2003 by rushjob]

fatduke11111 · 02-Sep-2003, 00:18

It is section 2.10 of the above link.... it shows the frame numbers etc...

http://www.bike-gizmos.com/DucatiSTFAQ.html

It is a yankee doc but it's not bad...

Paul

ST4 · 02-Sep-2003, 08:49

Good Andy. I've had dealings with CMC in the past. I got my ST4 from them in Chesterfield. Wouldnt go back in a hurry!

Paul.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode
Postbit Selector
Use Horizontal Postbit

31-Aug-2003, 20:06	#2
Rushjob Registered Forum User Big Twin Posts: 1,802 Join Date: Apr 2002 Location: Lincs Mood: :-) Rob The engine no should read ZDM996W4B ------- Cheers Andy Reply

31-Aug-2003, 21:11	#3
rockhopper Registered Forum User Ducati Corse Posts: 3,367 Join Date: Jul 2001 Location: Pinxton The engine itself is painted a light grey colour instead of the dark colour on the St4 and ST2. The capacity is also usually stamped on the crank cases somewhere. How did you get on with CMC Andy? Paul. Reply

31-Aug-2003, 22:03	#4
Rushjob Registered Forum User Big Twin Posts: 1,802 Join Date: Apr 2002 Location: Lincs Mood: :-) I should know in the morning! Reply

01-Sep-2003, 11:12	#5
Rob B Registered Forum User Ducati Meccanica Posts: 2,263 Join Date: Aug 2003 Location: Wimbourne, Dorset Mood: I'm so happyyyyyyyyyyyy Thanks guys Reply

01-Sep-2003, 21:26	#6
Rob B Registered Forum User Ducati Meccanica Posts: 2,263 Join Date: Aug 2003 Location: Wimbourne, Dorset Mood: I'm so happyyyyyyyyyyyy Follow up for Andy Andy, Thanks for your engine model designation response. I'm going to have a look at a motor on Weds and was wondering if you know what the other (st2, st4) engine type codes are. Thanks, Rob Reply

01-Sep-2003, 21:56	#7
fatduke11111 Registered Forum User 500SD Posts: 640 Join Date: Aug 2003 Location: Caterham, Surrey Mood: Christ been away too long.... Rob:- Here is a really good source of info for the ST2 / 4 / (some) 4s stuff - it may be worth looking at... http://www.bike-gizmos.com/DucatiSTFAQ.html Cheers Paul Reply

02-Sep-2003, 00:18	#9
fatduke11111 Registered Forum User 500SD Posts: 640 Join Date: Aug 2003 Location: Caterham, Surrey Mood: Christ been away too long.... It is section 2.10 of the above link.... it shows the frame numbers etc... http://www.bike-gizmos.com/DucatiSTFAQ.html It is a yankee doc but it's not bad... Paul Reply

02-Sep-2003, 08:49	#10
ST4 Registered Forum User Montjuic Posts: 65 Join Date: Jun 2003 Good Andy. I've had dealings with CMC in the past. I got my ST4 from them in Chesterfield. Wouldnt go back in a hurry! Paul. Reply