999 Headlight Adjustment

SuperRetard · 12-Apr-2006, 21:37

Are those black knobs supposed to adjust my headlights? They don't seem to have any effect?

SuperRetard · 12-Apr-2006, 22:04

They do work... eventually... thought I was gonna get RSI

Carbon749 · 12-Apr-2006, 22:07

Yep they do work eventually and yep thay are C**P

SuperRetard · 13-Apr-2006, 10:18

That, and Ducati seem to have stashed half a dozen broken hypodermics by the lower knob, my fingers look like I've been knife fighting.

jodycraw · 31-Jan-2008, 18:08

Old thread ressurected here, but my bike just failed the MOT on headlight adjustment (and damn exhaust stamping). My black knobs don't do anything, it's like they're not attached to anything inside the light unit. And yes i've tried turning them loads and loads x 10 times.

It's almost like the thread's have come off or stripped - is this possible? Is there anything I can do to re-attach them? (it's a 2004 749s)

Sharpy G · 31-Jan-2008, 18:17

Quote:

Originally Posted by jodycraw

my bike just failed the MOT on headlight adjustment (and damn exhaust stamping)

not sure about the headlight, but for the exhaust ?

KeefyB · 31-Jan-2008, 19:28

Quote:

Originally Posted by Sharpy G

not sure about the headlight, but for the exhaust ?

Works for me.

Carbon749 · 31-Jan-2008, 20:03

Quote:

Originally Posted by jodycraw

Old thread ressurected here, but my bike just failed the MOT on headlight adjustment (and damn exhaust stamping). My black knobs don't do anything, it's like they're not attached to anything inside the light unit. And yes i've tried turning them loads and loads x 10 times.

It's almost like the thread's have come off or stripped - is this possible? Is there anything I can do to re-attach them? (it's a 2004 749s)

Clearly going to wrong garage if they are fussy about a stamp, my 749r passed with Termi .... tester said it made it sound "right"

KeefyB · 31-Jan-2008, 20:26

Quote:

Originally Posted by Carbon749

Clearly going to wrong garage if they are fussy about a stamp, my 749r passed with Termi .... tester said it made it sound "right"

Yeah but most of 'em are stamped 'FOR RACING USE ONLY'.Mr.MOT tester cannot ingnore that.

Carbon749 · 31-Jan-2008, 20:34

Quote:

Originally Posted by KeefyB

Yeah but most of 'em are stamped 'FOR RACING USE ONLY'.Mr.MOT tester cannot ingnore that.

Get a really good welder with a tig kit, run a flat neat weld over the "For Racing Use Only", then run a similar weld down the other side of the can so they match. Clean up the welds with a scotch bright pad ..... sorted.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode
Postbit Selector
Use Horizontal Postbit

12-Apr-2006, 21:37	#1
SuperRetard Registered Forum User Posts: 12 Join Date: Apr 2006 Location: Melton Mowbray (Welcome to Pie Country) 999 Headlight Adjustment Are those black knobs supposed to adjust my headlights? They don't seem to have any effect? Reply

12-Apr-2006, 22:04	#2
SuperRetard Registered Forum User Posts: 12 Join Date: Apr 2006 Location: Melton Mowbray (Welcome to Pie Country) They do work... eventually... thought I was gonna get RSI Reply

12-Apr-2006, 22:07	#3
Carbon749 Registered Forum User Big Twin Posts: 1,956 Join Date: Mar 2005 Location: Normally in my own little world Mood: I own a flame thrower Yep they do work eventually and yep thay are C**P Reply

13-Apr-2006, 10:18	#4
SuperRetard Registered Forum User Posts: 12 Join Date: Apr 2006 Location: Melton Mowbray (Welcome to Pie Country) That, and Ducati seem to have stashed half a dozen broken hypodermics by the lower knob, my fingers look like I've been knife fighting. Reply