non starter - any ideas?

chunda · 13-May-2006, 21:00

He guys
Well don't know what's going on. Went to start the 749 after its monster layoff and... nothing. Charged battery in, dash lights up as it should and lights go out but neutral light goes out as well leaving just the oil light on. And the bike is in neutral. Checked the fuses - ok. Also can't remember back that far but can you not hear the fuel pump make a buzzing noise - 'cos it ain't now! Any clues would be happily received!!
Cheers
H

wilf · 13-May-2006, 21:08

The electronics may not let the bike start if its not in neutral (of if it thinks it isn't in neutral)

Check its not in a false neutral (can be between 3rd and 4th)

or

The neutral light switch may have got stuck, if you put it into gear (you may have to roll the bike back and forward a bit to get it in) then it may click it back into life.

when the neutral light then comes on, the fuel pump should prime and your off!

good luck.

chunda · 13-May-2006, 21:13

Yeah that makes sense, I was thinking it must be something to do with neutral. Have been up and down the box a few times without seeing neutral but will try rolling it in gear - thanks!

bolds · 13-May-2006, 22:08

Are you getting the orange engine management light coming on?

KeefyB · 13-May-2006, 22:09

Could just be the connection on the neutral light switch in the back of the gear box.Had trouble starting my Multi and found the connection was loose.
Try starting the bike with the clutch lever pulled in.

chunda · 14-May-2006, 17:01

Thanks for your suggestions and spot on to KeefyB - the neutral wire was loose! Does not seem to really go in well at all. Never mind all is good now...
Cheers

KeefyB · 15-May-2006, 05:57

Yep just a crappy push on connection.A bit awkward to get at too.
Glad you have it sorted.

bike mad · 16-May-2006, 11:05

keefy 10/10
keep up the good work

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode
Postbit Selector
Use Horizontal Postbit

13-May-2006, 21:13	#3
chunda Registered Forum User Posts: 36 Join Date: Feb 2003 Location: Highlands Mood: desperately seeking ...summer Yeah that makes sense, I was thinking it must be something to do with neutral. Have been up and down the box a few times without seeing neutral but will try rolling it in gear - thanks! Reply

13-May-2006, 22:08	#4
bolds Registered Forum User GTL Posts: 462 Join Date: Apr 2004 Are you getting the orange engine management light coming on? Reply

13-May-2006, 22:09	#5
KeefyB Registered Forum User WSB Hero Posts: 7,600 Join Date: May 2002 Location: The Fens. Mood: Lurkin'..... Could just be the connection on the neutral light switch in the back of the gear box.Had trouble starting my Multi and found the connection was loose. Try starting the bike with the clutch lever pulled in. Reply

14-May-2006, 17:01	#6
chunda Registered Forum User Posts: 36 Join Date: Feb 2003 Location: Highlands Mood: desperately seeking ...summer Thanks for your suggestions and spot on to KeefyB - the neutral wire was loose! Does not seem to really go in well at all. Never mind all is good now... Cheers Reply

15-May-2006, 05:57	#7
KeefyB Registered Forum User WSB Hero Posts: 7,600 Join Date: May 2002 Location: The Fens. Mood: Lurkin'..... Yep just a crappy push on connection.A bit awkward to get at too. Glad you have it sorted. Reply

16-May-2006, 11:05	#8
bike mad Registered Forum User Mille Posts: 297 Join Date: Jun 2005 Location: just out side sidmouth in devon keefy 10/10 keep up the good work Reply