New Drive line

Rick · 21-May-2006, 16:20

I have brought a new chain, front sprocket and rear sprocket and I am thinking of doing the fitting myself. Is it an easy job ? Anyone have nay tips for me ?
Rick

m1keyp · 21-May-2006, 17:06

If you have a chain breaker/riveter its a doddle.

I managed it

andyb · 21-May-2006, 17:19

undo the big nuts before taking the chain off!

TopiToo · 21-May-2006, 18:43

Hello Rick

just finished this job myself, as andyb says undo the big nut first,
I also put the bike in first gear, helps stop the wheel spinning.

If you have a Haynes its all straight forward.

good luck . .

regards

TopiToo

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode
Postbit Selector
Use Horizontal Postbit

21-May-2006, 16:20	#1
Rick Registered Forum User GTL Posts: 409 Join Date: May 2005 Location: Örebro, SWEDEN New Drive line I have brought a new chain, front sprocket and rear sprocket and I am thinking of doing the fitting myself. Is it an easy job ? Anyone have nay tips for me ? Rick Reply

21-May-2006, 17:06	#2
m1keyp Registered Forum User 500SD Posts: 714 Join Date: Mar 2004 Location: Cambridgeshire If you have a chain breaker/riveter its a doddle. I managed it Reply

21-May-2006, 17:19	#3
andyb Registered Forum User BSB Star Posts: 6,720 Join Date: Feb 2002 Location: northampton Mood: Has change happened...must of missed it! undo the big nuts before taking the chain off! Reply

21-May-2006, 18:43	#4
TopiToo Registered Forum User Ducati Meccanica Bikes: 748ish . . Posts: 2,121 Join Date: Sep 2001 Location: SW Londinium Mood: Sampai jumpa lagi Hello Rick just finished this job myself, as andyb says undo the big nut first, I also put the bike in first gear, helps stop the wheel spinning. If you have a Haynes its all straight forward. good luck . . regards TopiToo Reply