Datatool alarm - help please !!!

marcusjames · 31-May-2006, 17:07

Hi all

Have a Datatool system 3 on the bike. It's started a bizarre ticking noise and playing up. Doesn't automatically arm and goes off when I do it manually.

It can be switched off and the bike started but the ticking stays. The bike battery appears fine.

Any thoughts would be grately appreciated.

Cheers

Marcus

weeksy2 · 31-May-2006, 17:18

check the trip switch under the seat.... look by your ECU box... should be a little push button/connection type sensor thing.....

HANCYM · 01-Jun-2006, 21:54

Sounds like it's switchin into service mode. I think they do the ticking thing to warn you they will not arm automatically

Pete A · 02-Jun-2006, 10:39

If you ring Datatool their service people are really helpful, when mine played up last year they told me how to dismantle it and replace the board, even though it was out of warranty. All done f.o.c.!

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode
Postbit Selector
Use Horizontal Postbit

31-May-2006, 17:18	#2
weeksy2 Big Twin Posts: 1,610 Join Date: Nov 2005 Mood: R1's are better than Ducatis' check the trip switch under the seat.... look by your ECU box... should be a little push button/connection type sensor thing..... Reply

01-Jun-2006, 21:54	#3
HANCYM Registered Forum User Bevel Head Posts: 86 Join Date: Jun 2004 Location: Norwich Sounds like it's switchin into service mode. I think they do the ticking thing to warn you they will not arm automatically Reply

02-Jun-2006, 10:39	#4
Pete A Registered Forum User Mille Posts: 111 Join Date: Sep 2001 Location: Cambridgeshire If you ring Datatool their service people are really helpful, when mine played up last year they told me how to dismantle it and replace the board, even though it was out of warranty. All done f.o.c.! Reply