Mono seat for biposto

Albie · 03-Oct-2006, 22:19

When I get 748 this week its a biposto but looks pretty good with seat done with number boards. I wont be using it much if hardly at all as a Bip and wondered how much a mono seat is or can you recommend a good cheap alternative fibre glass but with a good paint job.
Thanks.

Oh and it Red

crust · 03-Oct-2006, 22:48

I bought a complete genuine Ducati seat, lights, brackets etc for £250 off ebay.

Its worth having it all as it takes a couple of minutes to swap the seat units and screw four bolts in for the footrests.

I can do the swap in under 10 minutes.

Crust

ricky996 · 05-Oct-2006, 23:55

I am buying one of these seat units next week http://www.emotouk.com/ducati/748998bodyparts.htm

I am wondering if to go for the one with carbon revealed, I think this was the same as the 998R model, tough one.

skidlids · 06-Oct-2006, 00:46

I can lay my hands on

a complete with tail light and seat pad original unmarked 996SPS seat, £250

AND

a complete with tail light and seat pad original 998R Carbon seat unit for £300

Albie · 06-Oct-2006, 20:02

A bit more than I want to spend at moment Skids but thanks.

multi600 · 07-Oct-2006, 20:11

What bracket is that, I swap from one to the other with no extra bracket that I'm aware of.

Mike

aka.eric · 07-Oct-2006, 20:22

The bracket is Part No 82711201A - Plate,Mono onto Bip.Also 2 spacers and 2 screws,or as said already available as a kit.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode
Postbit Selector
Use Horizontal Postbit

03-Oct-2006, 22:48	#2
crust Registered Forum User Mille Posts: 192 Join Date: Jul 2004 Mood: :( broken I bought a complete genuine Ducati seat, lights, brackets etc for £250 off ebay. Its worth having it all as it takes a couple of minutes to swap the seat units and screw four bolts in for the footrests. I can do the swap in under 10 minutes. Crust Reply

05-Oct-2006, 23:55	#3
ricky996 Registered Forum User Posts: 30 Join Date: Jul 2006 I am buying one of these seat units next week http://www.emotouk.com/ducati/748998bodyparts.htm I am wondering if to go for the one with carbon revealed, I think this was the same as the 998R model, tough one. Reply

06-Oct-2006, 00:46	#4
skidlids MotoGP God Posts: 18,275 Join Date: Apr 2002 Location: Oxford Mood: Its ONLY a Bike Club I can lay my hands on a complete with tail light and seat pad original unmarked 996SPS seat, £250 AND a complete with tail light and seat pad original 998R Carbon seat unit for £300 Checkout the Desmo Due Paddock on Facebook Reply

06-Oct-2006, 20:02	#5
Albie Registered Forum User 500SD Posts: 755 Join Date: Aug 2004 Location: Rochester Kent A bit more than I want to spend at moment Skids but thanks. Reply

07-Oct-2006, 20:11	#6
multi600 Registered Forum User 888 at Last !!! Posts: 938 Join Date: Dec 2004 Location: Southampton Mood: Hopefull What bracket is that, I swap from one to the other with no extra bracket that I'm aware of. Mike Reply

07-Oct-2006, 20:22	#7
aka.eric Registered Forum User 500SD Posts: 651 Join Date: Jul 2004 The bracket is Part No 82711201A - Plate,Mono onto Bip.Also 2 spacers and 2 screws,or as said already available as a kit. Reply