Scottoiler & Multi-Strada

torvista · 31-Jan-2004, 20:44

Hi,
has anyone had a go at fitting a Scottoiler on the Multi-Strada? Just wondering how people have fitted the injector to the swingarm.

ta
Steve

Jools · 01-Feb-2004, 14:43

Maybe you don't need to. Mine's fitted with the oulet near the front sprocket.

It aint a Multistrada but it shouldn't be too difficult to fit it there

Ian · 01-Feb-2004, 15:53

it has been done, I have seen a picture or a bike (memory fades with age) of one on a MS somewhere, - if in doubt check with Scottoiler people.

KeefyB · 01-Feb-2004, 16:48

Here you go,check this out.Although a neater solution would be to install the outlet near the front sprocket as on Jools ST.

torvista · 01-Feb-2004, 18:53

Thanks very much for the advice, I was thinking of pointing it at the front sprocket too,

regards
Steve

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode
Postbit Selector
Use Horizontal Postbit

31-Jan-2004, 20:44	#1
torvista Registered Forum User Posts: 2 Join Date: Jan 2004 Scottoiler & Multi-Strada Hi, has anyone had a go at fitting a Scottoiler on the Multi-Strada? Just wondering how people have fitted the injector to the swingarm. ta Steve Reply

01-Feb-2004, 14:43	#2
Jools DSC Club Member BSB Star Posts: 6,930 Join Date: Jul 2002 Location: Bedfordshire Mood: MT Meglomaniac Maybe you don't need to. Mine's fitted with the oulet near the front sprocket. It aint a Multistrada but it shouldn't be too difficult to fit it there Reply

01-Feb-2004, 15:53	#3
Ian Registered Forum User Ducati Meccanica Posts: 2,333 Join Date: Jun 2001 Location: nr Gatwick, West Sussex/Surrey borders Mood: Still having fun! it has been done, I have seen a picture or a bike (memory fades with age) of one on a MS somewhere, - if in doubt check with Scottoiler people. Reply

01-Feb-2004, 16:48	#4
KeefyB Registered Forum User WSB Hero Posts: 7,600 Join Date: May 2002 Location: The Fens. Mood: Lurkin'..... Here you go,check this out.Although a neater solution would be to install the outlet near the front sprocket as on Jools ST. Reply

01-Feb-2004, 18:53	#5
torvista Registered Forum User Posts: 2 Join Date: Jan 2004 Thanks very much for the advice, I was thinking of pointing it at the front sprocket too, regards Steve Reply