TPO stacks...

ENGAKATS · 20-Jan-2009, 10:27

Guys,

Has anyone used either of these:

http://www.tpoparts.com/catalog/product_info.php?products_id=59&osCsid=6daf331a8b9 05e4da18d714234de25dc

http://www.tpoparts.com/catalog/product_info.php?products_id=119&osCsid=6daf331a8b 905e4da18d714234de25dc

https://www.tpoparts.com/productimag...comparison.jpg

Any noticeable differences??

Thanks

skidlids · 20-Jan-2009, 10:41

There is a Class A DD bike running with something very similar, can't recall if its No 80 or 81

ChrisBushell · 20-Jan-2009, 11:08

I am running a very similare setup on two of my bikes, except that we machined up the aluminium adaptors from the carbs to the K&N filters ourselves.

Certinly they work well, though our primary aim was to keep the road dust, etc out of the cylinders rather than extra performance.

Chris

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode
Postbit Selector
Use Horizontal Postbit

20-Jan-2009, 10:41	#2
skidlids MotoGP God Posts: 18,275 Join Date: Apr 2002 Location: Oxford Mood: Its ONLY a Bike Club There is a Class A DD bike running with something very similar, can't recall if its No 80 or 81 Checkout the Desmo Due Paddock on Facebook Reply