are these for anything?

TopiToo · 21-Jun-2009, 23:37

Hello

Been driving me mad looking for bolts
that go here . . . can not find any info
as to what there used for.

any ideas?

TopiToo

KeefyB · 22-Jun-2009, 07:59

I'm pretty sure they are not used for anything.The threads are probably used in the factory for holding tool or summat.

ducatiparts.110mb · 29-Jun-2009, 22:09

They are the threads that the cambelt tensioning pulleys go into.

The front and rear heads are made from the same casting, and machined identically. When the factory builds up heads they make them into either front or back heads depending on the cams that they fit and which side the cams go in from.

Mark

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode
Postbit Selector
Use Horizontal Postbit

22-Jun-2009, 07:59	#2
KeefyB Registered Forum User WSB Hero Posts: 7,600 Join Date: May 2002 Location: The Fens. Mood: Lurkin'..... I'm pretty sure they are not used for anything.The threads are probably used in the factory for holding tool or summat. Reply

29-Jun-2009, 22:09	#3
ducatiparts.110mb Registered Forum User Montjuic Posts: 66 Join Date: Nov 2007 They are the threads that the cambelt tensioning pulleys go into. The front and rear heads are made from the same casting, and machined identically. When the factory builds up heads they make them into either front or back heads depending on the cams that they fit and which side the cams go in from. Mark Reply