Something not quite right!!

mbracing748 · 28-Jun-2009, 18:03

I thought I would share this with everyone. Whilst Racing at oulton something strange happened.....

It's also screwed the lobe on the SP cam shaft.... So if anyone has a set of SP Cams I'll be happy to purchase...

nelly · 28-Jun-2009, 20:34

Seen that happen a few times. Usually down to the closing shim being tight... It "pulls" the top off the valve, straight thru' where the 1/2 rig groove is machined....

Is it 748 or 916 Sp? Gotta a strange suspicion i have 748SP cams BNIB

ducati dad · 28-Jun-2009, 21:23

SP cams from Rally

http://www.italiansportingclub.co.uk...topic4487.html

mbracing748 · 28-Jun-2009, 22:05

Quote:

Originally Posted by nelly

Seen that happen a few times. Usually down to the closing shim being tight... It "pulls" the top off the valve, straight thru' where the 1/2 rig groove is machined....

Is it 748 or 916 Sp? Gotta a strange suspicion i have 748SP cams BNIB

It's a 748SP - I hoping to speak to Mike D tomorrow to get the bike to him before a start purchasing items, If you wanna sell then mail with a price ;-)...

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode
Postbit Selector
Use Horizontal Postbit

28-Jun-2009, 20:34	#2
nelly Registered Forum User Ducati Corse Posts: 3,134 Join Date: Jan 2002 Location: notts Mood: Bloo and Yellow.. and Red now ;) Seen that happen a few times. Usually down to the closing shim being tight... It "pulls" the top off the valve, straight thru' where the 1/2 rig groove is machined.... Is it 748 or 916 Sp? Gotta a strange suspicion i have 748SP cams BNIB Reply

28-Jun-2009, 21:23	#3
ducati dad Registered Forum User GTL Posts: 438 Join Date: Jun 2006 Location: Kent Mood: Older, but none the bleedin' wiser SP cams from Rally http://www.italiansportingclub.co.uk...topic4487.html Reply