Ducati Sporting Club UK > DesmoDue Race Series > DesmoDue - General Questions and Chat > Rev conter

[Imola Duke]

I'm looking for a late 583 monster engine rev counter and
wondered what i can fit ?

I have a 900ssie one but i'm told it needs the ecu output to work....?

Thanks

[skidlids]

Steve your not at Mallory then

DP ones will fit as will a Stack Tacho and a Scitsu with Red Backing, a Elliot one will probably be OK as well

[Imola Duke]

Originally Posted by skidlids

Steve your not at Mallory then

DP ones will fit as will a Stack Tacho and a Scitsu with Red Backing, a Elliot one will probably be OK as well

The frosty morning put that idea to bed

[skidlids]

Frost what Frost
Early morning rain followed by sunshine down this way

[Imola Duke]

Over this way .... to cold for me

So i spent a couple of hours in the shed checking the shims on the bitsa,
which were all in tolerance

[skidlids]

Originally Posted by Imola Duke

So i spent a couple of hours in the shed checking the shims on the bitsa,
which were all in tolerance

Funny that
Seems like that is often the case when raced by someone who has many years experience of riding and racing Ducatis, they learn not to over rev them.
Get the gearing right and get Max Power and Max Torque figures from a Dyno run then ride it to the rev counter in the first 4 gears.

[Imola Duke]

Originally Posted by skidlids

Funny that
Seems like that is often the case when raced by someone who has many years experience of riding and racing Ducatis, they learn not to over rev them.
Get the gearing right and get Max Power and Max Torque figures from a Dyno run then ride it to the rev counter in the first 4 gears.

I learnt not to over rev ducati's long ago with the threat of a good kicking
off the old chap when he let me loose on his MHR bevel....

[Gilps]

I put an Elliot one on mine. Easy to fit and good service and advice from them.

[kenoir]

I've got a Scitsu for mine! Can't tell you if it's working yet but it should be OK

[skidlids]

Originally Posted by kenoir

I've got a Scitsu for mine! Can't tell you if it's working yet but it should be OK

Should have a RED backing on it

although I do have a Red backed Scitsu that didn't read correctly on my 600SS.
As its direct powered from the bikes battery I think its been back to the factory and altered to run on a bike using a P8 computer such as a SPS.