748/9** Alloy rear subframe

Nattyboy · 31-Jan-2011, 09:35

This has been professionaly converted to go straight on a Biposto so the ECU will fit straight on (there is a cross member in the way normally as the loom is too short). The modifcation consists of a CNC machined bracket at the front and some additional bracketry at the rear. All relevant points are threaded. A really tidy looking unit.

One of the best ways to save weight from your bike. A standard Biposto subframe weighs3.4 kgs, this one wighs just 1.6kgs !

More pics available (including the frame in situ on the bike).

£195

skidlids · 31-Jan-2011, 22:21

Looks like it will still take the original P8 ECU it was intended for as well as the 1.6m its been modified for

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode
Postbit Selector
Use Horizontal Postbit

31-Jan-2011, 22:21	#2
skidlids MotoGP God Posts: 18,275 Join Date: Apr 2002 Location: Oxford Mood: Its ONLY a Bike Club Looks like it will still take the original P8 ECU it was intended for as well as the 1.6m its been modified for Checkout the Desmo Due Paddock on Facebook Reply