will a 50mm termi slip on fit the 998s

funkatronic · 04-Jan-2012, 22:57

H there

i am looking at a 2nd hand set of termis from a 916

i have been told these are 50mm, will these be an ok fot for the 998s (which from what i can find has 50mm headers and link pipes)

thanks in advance

ali

Cobbett · 04-Jan-2012, 23:36

Yes: stock 998 was 45mm but S is 50mm.

skidlids · 04-Jan-2012, 23:55

The 916 came with 45mm Headers but a 45mm to 50mm half system was a popular conversion so double check they are 50mm if they came off a 916

funkatronic · 04-Jan-2012, 23:55

can you confirm 916 (748, 996) and 998 termis are all the same (for a give pipe diameter)

thanks

skidlids · 04-Jan-2012, 23:59

Hope i'm right with this little lot

45mm = 748's (but not the 748R) 916, early 996BP's and 998BP
50mm = 748R, 996SPS, some Later 996BP's, 998S and 998R

funkatronic · 05-Jan-2012, 00:39

great thanks

i think its from a 916 sps,

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode
Postbit Selector
Use Horizontal Postbit

04-Jan-2012, 22:57	#1
funkatronic Registered Forum User Montjuic Posts: 56 Join Date: Nov 2011 will a 50mm termi slip on fit the 998s H there i am looking at a 2nd hand set of termis from a 916 i have been told these are 50mm, will these be an ok fot for the 998s (which from what i can find has 50mm headers and link pipes) thanks in advance ali Reply

04-Jan-2012, 23:36	#2
Cobbett Registered Forum User Mille Bikes: 750ss, 998s Posts: 217 Join Date: Jan 2010 Location: Thames Valley Yes: stock 998 was 45mm but S is 50mm. Reply

04-Jan-2012, 23:55	#3
skidlids MotoGP God Posts: 18,275 Join Date: Apr 2002 Location: Oxford Mood: Its ONLY a Bike Club The 916 came with 45mm Headers but a 45mm to 50mm half system was a popular conversion so double check they are 50mm if they came off a 916 Checkout the Desmo Due Paddock on Facebook Reply

04-Jan-2012, 23:59	#5
skidlids MotoGP God Posts: 18,275 Join Date: Apr 2002 Location: Oxford Mood: Its ONLY a Bike Club Hope i'm right with this little lot 45mm = 748's (but not the 748R) 916, early 996BP's and 998BP 50mm = 748R, 996SPS, some Later 996BP's, 998S and 998R Checkout the Desmo Due Paddock on Facebook Reply

05-Jan-2012, 00:39	#6
funkatronic Registered Forum User Montjuic Posts: 56 Join Date: Nov 2011 great thanks i think its from a 916 sps, Reply