620 sport - Tank and crazy tank pad

Spjallen · 12-Feb-2012, 22:19

Hi there. I'm just in the final stages of my build and preparing for paint - red or blue or red or blue........ My question is; is it safe to grind of the crazy tank pad locating lug?It'd be pretty painful riding up against that!!

skidlids · 12-Feb-2012, 22:30

I drilled a small pilot hole in mine, then drilled it out futher with a large Cone cutter and then tapped what was left as flat as I could aginst the tank and put a sticker over it

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode
Postbit Selector
Use Horizontal Postbit

12-Feb-2012, 22:30	#2
skidlids MotoGP God Posts: 18,275 Join Date: Apr 2002 Location: Oxford Mood: Its ONLY a Bike Club I drilled a small pilot hole in mine, then drilled it out futher with a large Cone cutter and then tapped what was left as flat as I could aginst the tank and put a sticker over it Checkout the Desmo Due Paddock on Facebook Reply