Banjo Bolt Brake Light Switch Problem

Gav748sp · 03-Aug-2004, 22:53

Has anybody encountered this problem.....
Having now fitted Brembo radial pumps to the brake and clutch, i have now found this problem, the brake side has a single B.Bolt switch on it with a line made up by Earl's.
On full lock (right hand down) the wires from the bottom of the B.Bolt sw have been hitting the top of the airtube and are in danger of being cut through/sheered off...

Any experience of this or idea's most welcome.

Gav

keefer · 03-Aug-2004, 23:34

no marks on my air ducts.
only thing i get is the master cylinder touching the clocks on opposite lock

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode
Postbit Selector
Use Horizontal Postbit

03-Aug-2004, 23:34	#2
keefer Registered Forum User Ducati Meccanica Posts: 2,518 Join Date: Jul 2004 Location: hants Mood: Found a CR250. Let the bone braking begin no marks on my air ducts. only thing i get is the master cylinder touching the clocks on opposite lock Reply