Camera for Bullet Cams...

les996 · 07-Aug-2004, 21:35

Sorry to ask this - had a quick look in search, could find the right info...

Looking at buying a small digital camcorder that will fit under my (mono seat) and also run one of these bullet cams from highview.

A while back someone mentioned a JVC at about 300 mark - that is about my limit without getting into trouble with the wife...

Any help greatly appreciated.

Regards
Les

rockhopper · 07-Aug-2004, 22:10

Mine is a JVC GRD 70EK from RGB Direct. The price now is about £285 inc vat and shipping. Its got AV in which is what you need for a bullet cam.

les996 · 07-Aug-2004, 23:16

many thanks...

does it fit easily under the seat (996)
also have you tried a bullet cam on yours???

Regards
Les

les996 · 08-Aug-2004, 00:07

Better still - what is the physical size...

I can then measure up under the seat.

Many thanks in advance.

Les

Jon · 08-Aug-2004, 01:22

Steve I have a Sony DCR-TRV22E about £375.00 6 months ago and the way these things go, probably a lot less now. Measures about 125mm x 80mm x 60mm thick. Touch screen, memory stick, zoom and a lot of other stuff I don't understand.

Try this out http://www.prcdirect.co.uk/PRC/PRC.storefront

[Edited on 8-8-2004 by Jon]

rockhopper · 08-Aug-2004, 10:05

Dunno about the 996 cos I've got an ST4!! Its 155mm long 95mm high and 75mm wide so its slightly bigger than the sony. My plan is to use it with a bullet cam but as yet i havent got around to it.

All you need to make sure when you buy is that its got AV in,not all cams do.

les996 · 13-Aug-2004, 13:32

Many thanks to jon and paul for your help...

Have decided on a sony - HC40 (this seems to have all the requirements - so now time to part with my money...gulp!!!

I will also be going for a bullet cam...
I see 2 names that come up:

Highview and rfconcepts - is there any difference between the two???

Also do I need a LANC remote - or would the remote from the Camcorder suffice?

Regards - Les

Jon · 13-Aug-2004, 19:10

You can get a kit off Highview, cam, leads, mic etc.

Give him a ring or http://www.highviewelectronics.co.uk/

Rattler · 13-Aug-2004, 19:32

I'd recomend highview too, he's a member here and a really good guy.

Try a search on hear for highview and you'll see many good reports of his products and assistance.

Tim

les996 · 13-Aug-2004, 19:57

do you still have a bullet cam on your bike Tim?

Regards
Les

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode
Postbit Selector
Use Horizontal Postbit

07-Aug-2004, 22:10	#2
rockhopper Registered Forum User Ducati Corse Posts: 3,367 Join Date: Jul 2001 Location: Pinxton Mine is a JVC GRD 70EK from RGB Direct. The price now is about £285 inc vat and shipping. Its got AV in which is what you need for a bullet cam. Reply

07-Aug-2004, 23:16	#3
les996 Registered Forum User Mille Posts: 217 Join Date: May 2002 Location: Beds Mood: :-0 many thanks... does it fit easily under the seat (996) also have you tried a bullet cam on yours??? Regards Les Reply

08-Aug-2004, 00:07	#4
les996 Registered Forum User Mille Posts: 217 Join Date: May 2002 Location: Beds Mood: :-0 Better still - what is the physical size... I can then measure up under the seat. Many thanks in advance. Les Reply

08-Aug-2004, 10:05	#6
rockhopper Registered Forum User Ducati Corse Posts: 3,367 Join Date: Jul 2001 Location: Pinxton Dunno about the 996 cos I've got an ST4!! Its 155mm long 95mm high and 75mm wide so its slightly bigger than the sony. My plan is to use it with a bullet cam but as yet i havent got around to it. All you need to make sure when you buy is that its got AV in,not all cams do. Reply

13-Aug-2004, 19:10	#8
Jon Registered Forum User Ducati Corse Posts: 3,921 Join Date: Jun 2001 Location: Drayton Bassett, Staffs Mood: Tad more confident You can get a kit off Highview, cam, leads, mic etc. Give him a ring or http://www.highviewelectronics.co.uk/ Reply

13-Aug-2004, 19:32	#9
Rattler Registered Forum User WSB Hero Posts: 8,863 Join Date: May 2002 Location: Boys Town Mood: www.cantbearsed.co.uk I'd recomend highview too, he's a member here and a really good guy. Try a search on hear for highview and you'll see many good reports of his products and assistance. Tim Reply

13-Aug-2004, 19:57	#10
les996 Registered Forum User Mille Posts: 217 Join Date: May 2002 Location: Beds Mood: :-0 do you still have a bullet cam on your bike Tim? Regards Les Reply