anyone had any issue with the cooling fan constantly running when the battery is re-connected? The bike is stone cold (not used for 24 hours) but as soon as the battery is connected it starts straight away...and the battery is drained after a short while because of this.
Have got exactly the same issue after replacing my rad on my 1198! When I connect everything back up my fans are permanently on even with ignition off! Any ideas?! It maybe shorting somewhere but have only disconnected the fan connectors etc!
Sorted it by connecting everything up with fan fuse removed, fired it up and let it get to 108C then put fan fuse back in (wouldn't go past 62-64C with fuse in) Bike cooled down and fan switched off when it got back below 100C. Think it needed to complete a cooling cycle to reset the fan relay as it had gone over 100C previously when I holed the rad.