Ducati Sporting Club UK > DesmoDue Race Series > DesmoDue - General Questions and Chat > Bobbins to you

[skidlids]

Drill sizes I use for tapping metric threads

M4 use 3.3mm Drill
M5 use 4.2mm Drill
M6 use 5.0mm Drill
M8 use 6.8mm Drill as Phil Said
M10 ISO Metric use 8.5mm Drill
M10 Metric Fine use 8.8mm Drill

[Spjallen]

Well I've not fit the bobbins yet but done my first ever tapping to fit the toe guard. Thanks for all the info on sizes of drill and taps. It worked out just great and was loads of fun to do!

[Spjallen]

Bobbins finally fitted to the alloy Swingarm. I just drilled and tapped the billet section - similar to skids. Case, finally after loads of measuring, closed.

[bradders]

My spanner man is going to do mine trackside at snetterton

Good to have people in your camp that actually KNOW what they are doing





Yes that's you Nick B

[Spjallen]

Why don't you do it yourself? You'll never learn unless you try?

[bradders]

Concentrate on the important things, like 18 layers of paint!