Ducati Sporting Club UK > Model Specific - Discussion, Technical Problems and Help > 998 / 996 / 916 / 748 > REv Counter - Will this fit a 916 ?

[desmobob]

Thought they were all the same on 748,916,996,998 but the seller stipulates:

IT came off a 996BP It may not work on an SPS or other model as ECU signals were different

Here's the item.
http://cgi.ebay.co.uk/Ducati-996-Rev...QQcmdZViewItem

[skidlids]

Should work on any model with the 1.6m ecu, such as all 748s, 916BP, 916 Senna etc.
We have had problems trying to get a Ducati Performance race rev counter off a 748RS (1.6M ECU) to work on a 996SPS (P8 ECU), so we put it down to the differing ECUs.
The Revcounter on my 996BP (1.6M ECU) pulses a lot and makes me suspect it is off of a 916SP or SPS (P8 ECUs).

But only suspicions haven't done any proper testing to draw definite conclusions

[desmobob]

Nice one ! Thanks for the response, I'll ask if it's 1.6m ecu.

[DC]

Is that the case then, different tachometers for different models such as sps and bipostas?

Might be why my tacho has stopped working since I grafted the SPS lump and loom into it.
It all rides and runs fine but as yet, I have been unable to sort it. All electrics work bar the tacho!!?? Thought it may be the P8 ECU playing up but figured that if the bike was running ok then the P8 must be working as well?

DC.

[wilf]

There are 2 types of tacho (on the road bikes) and they don't work if swapped over. So if you have a 1.6m you cant fit an SP/SPS tacho and vise vera.

[skidlids]

Thanks for confirming what I suspected Wilf

[DC]

Originally Posted by wilf

There are 2 types of tacho (on the road bikes) and they don't work if swapped over. So if you have a 1.6m you cant fit an SP/SPS tacho and vise vera.

Aha!

Cheers for that Wilf.

DC.