Ducati Sporting Club UK > Model Specific - Discussion, Technical Problems and Help > 999 / 749 > 999R PC3 map required (stock ecu+race termi)

[chillo]

Hi all

I need a pc3 map for a 03/04 model 999r with STOCK ecu and race termi (the one one supplied with the bike)

anyone had one done they can email?

many thanks

Simon

[Simon Reed]

Go to;www.dynojet.com simon,you should be able to download what you need from there !

[chillo]

thanks Simon i did have a look before but they only show 'European model' which is going to be different from an 'R' map.

Prob i have is my race ecu is faulty (rev limit moving around and power figures varying by as much as 6rwhp between consecutive runs)

Swapping out race ecu for stock ecu and want to put a map in to test before i go back on th edyno again.

[chris.p]

Try "Bionicle" on this board he has a 999r & a power comander I think.


Chris.

[andyb]

I have found with mine that the rev limiter does cut in every now and then at revs lower than the rev limit..........is that whats happening to yours?

[ricco749s]

Same with my 999r...I in fact spoke with Moto Rapido only yesterday about the problem - my rev limiter appears to be kicking in at under 9thou and Ben there tells me it should be coming in at around 10,200. He's recommended checking that the rev counter is working correctly before doing anything too drastic. Also tells me that the standard ECU cannot be adjusted and that a Power Commander will not sort it?