Ducati Sporting Club UK > Model Specific - Discussion, Technical Problems and Help > 998 / 996 / 916 / 748 > Radial mastercylinder mounting

[Tinkler]

Hi there just got a Brake and clutch brembo master cylinders for my 01 748R.
But strugling a little with mounting the resovours so do any people have some photos of bracket ideas and fitting advice
thaks
Jamie

[antonye]

Should be lots on here, do a search.

I mounted mine on the SS via the yoke, but that was after removing the igintion

[Tinkler]

Thanks thats the idea i had also but if anyone who has got a 784 - 996 style bike with master cylinders also fitted and has got photos that would be verry much apreciated
thanks
JAmie

[antonye]

Somebody posted up some photos of their radials not so long ago (like last week) as I remember looking at the brackets for the reserviors myself.

I think they put a slip of metal into the clamp of the radial (where the two halves bolt onto the bar) and then it was bent out into the right shape to attach a small 15ml reservoir. No point in having a huge reservoir, as long as you keep an eye on your fluid.

Have a browse through the pics section, or in this section, to see if you can find it.

[antonye]

Here you go, from Keefer's "I love carbon" thread...



and

[mikesps]

I used a longer bolt on one of the bar mounts with a spacer sleeve under it. Photo possibly attached.