Ducati Sporting Club UK > For Sale / Wanted > Private Adverts > Wanted for my 998R

[skidlids]

Ohlins R&T Caliper Mounts for 108mm radial calipers

Anyone know where I can get a set of these seperate from the forks

I currently have the mounts that take my 4-pad 65mm mount calipers, but want to swap to my AP radials along with AP race discs fitted to a Narrow track front wheel

[Rattler]

Show off!!!

[chris.p]

Must have money to burn
Think these are what you are looking for Kev, well maybe


http://www.motowheels.com/italian/myproducts.cfm?parentcategoryid=116%7CDucati%20Bra kes&productID=3837&showDetail=1&categoryID=540|Bra ke%20Caliper%20Mounts%20%26%20Adapters&vendoridtod isplay=0&filterFor=&collection=168%7CEuropean%20Mo torcycle%20Parts


http://www.motowheels.com/italian/myproducts.cfm?parentcategoryid=116%7CDucati%20Bra kes&CategoryID=540|Brake%20Caliper%20Mounts%20%26% 20Adapters&collection=168%7CEuropean%20Motorcycle% 20Parts


Not exactly cheap mind you


Chris

[Chef]

998r with an AP Radial set up

I'm off to the bathroom...........;-)

[skidlids]

Originally Posted by chris.p

Must have money to burn
Think these are what you are looking for Kev, well maybe

Not exactly cheap mind you

Cheers Chris
I had been to that link a few months ago but they were saying they were out of stock

Could do with the Exchange rate improving a bit more, May have to be my Xmas present to myself at $575 and I'm hoping thats for the pair

At $70 I'll make my own spacers

[powerwheelie]

Skiddles, what RT forks do you have? I have the ones with the side screws, as in this pic:



Alex Ortner makes a set of radial fork bottoms which he used to fabricate for US based Cyclecat. They´re plug and play. I don´t understand why you would want 108mm over 100? Are you running race Brembos or cheap Tokico shyte? I´ll see if I can find a pic of Alex´s bottoms.

[powerwheelie]

Here we go, this is Matthew Smith´s bike (read more about it on http://www.visi.com/~moperfserv/road_trip.htm ). Alex Ortner told me the following:

Hi Ben
Sorry that was a product I designed for Cycle Cat but they are out of
business and I can't make those on my home machines. You might try On Cycles
they had the last of the Cycle Cat inventory see if they have any left. If
not I might be able to get another machine shop to make some but I can't
match the old CC price.

Alex Ortner
1770 Beechcroft
Keego Harbor, MI, 48320
248-683-1167
aortner@comcast.net
www.alexortner.com

the old CC price apparently was something around 325 US$.

If you´re buying, I am interested in a set for my bike. Maybe we can do a small group buy or something.

[chris.p]

Originally Posted by skidlids

Cheers Chris
I had been to that link a few months ago but they were saying they were out of stock

Could do with the Exchange rate improving a bit more, May have to be my Xmas present to myself at $575 and I'm hoping thats for the pair

Looks like it is for each one , would have thought so as a pair to fit Showa forks are $900 +


Chris

[skidlids]

Originally Posted by chris.p

Looks like it is for each one , would have thought so as a pair to fit Showa forks are $900 +


Chris

For the Showas you have to buy the complete fork Bottom casting just as you do with the earlier Ohlins R&T forks with the side mounted caliper bolts, so I would expect them to cost a fair bit more, as I have the FG320 forks the lower part already allows for a range of different brackets to be fitted

A few years ago I purchased some New AP Radial Calipers through Harris Performance with the intention of fitting them to 108mm Magnesium mounts on the bottom of a set of works RGV500 Ohlins forks I have, I spoke to Steve Harris at the Ally Pally Show and he popped around to the AP stand and sorted me a good Price.
Since then they have only been used a couple of times and that was on Dallas's Ex Superstock 2004 Yam R1