Ducati Sporting Club UK > Model Specific - Discussion, Technical Problems and Help > 998 / 996 / 916 / 748 > rear lights help please

[loverobot]

i have acquired a bip seat for my 748 and it is complete with lights and fixings etc BUT the connector for the lights at the seat end is scotchblocked and there is no connector - does anyone have a spare connector or even better a cable with connector attached? also i need the little bracket that fastens to the front of the seat into which the pivot goes so i can attach it to the bike??

thanks in advance

[antonye]

You can buy them from RS or Farnell, so you can match it exactly to the oem plug or socket.

[loverobot]

brillianto - any idea of the part / code antonye? otherwise will either have to remove one from my existing seat or take the whole seat unit !

[antonye]

Just having a look now. The plugs/sockets they use are quite common (typical Ducati!) so you can buy the exact part with the matching colour shroud too. Hold tight and I'll find it...

[loverobot]

thanks again - i cant remember what it looks like at all and would not have a clue even what to call the little bugger

[antonye]

They're called "IP 67 AMP Superseal"

On http://rswww.com/ goto Electronic Components, Power & Connectors > Connectors > Electrical / Power > Vehicle - Automotice Power

[loverobot]

brilliant
thanks antonye - i would never have found that and ducati leeds couldnt tell me where to get one
really appreciated
means i can get my touring seat sorted!

[antonye]

No worries.

By the way, I've got some more frame plugs "in stock" - didn't you need a spare or two? Send me a u2u with what you need and your address and I'll sort you out.

[loverobot]

cheers antonye
u2u on its way