fs: Ducati Corse 916R fuel tank fittings

powerwheelie · 03-Dec-2009, 20:16

Details and images here:
http://www.ducati.ms/forums/showthread.php?t=77150

pguenet · 03-Dec-2009, 23:58

I am quite interested though need to confirm the fitting.

I have 996RS tank on the 996, which has 2 bits bolted on front of the tank that slot in hoops in the frame. I don't believe that this will sort out this fitting. Please let me know if you know any better.

I have also 998RS tank on the 998 which has the quick release fittings but those are really completely useless. Do you know if those can replace those?

Thanks
philippe

powerwheelie · 04-Dec-2009, 11:46

Ciao Phillipo,

these are strictly 916R, the 996RS were different. And the 998RS and F bikes then again were different.

Let me show you some schematics and pics from my old post at Ducati.ms:

Quote:

Originally Posted by Ben710;718689

Sorry mate, I stand corrected.

The 998 RS has the mounting hardware in the front.

Yours appears to be a 2000 996 RS unit, could that be?

For reference, this is what I have. 916R 1998

pguenet · 04-Dec-2009, 18:44

Yeah typical, I have a flavour of the 2 other ones...
I which I could manage to adapt the 916 R fittings instead of the 996 RS ones described here which are absolutely rubbish.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode
Postbit Selector
		Use Vertical Postbit

03-Dec-2009, 20:16	#1
powerwheelie Registered Forum User Bevel Head Posts: 91 Join Date: May 2008 fs: Ducati Corse 916R fuel tank fittings Details and images here: http://www.ducati.ms/forums/showthread.php?t=77150 Reply

04-Dec-2009, 18:44	#4
pguenet Registered Forum User Big Twin Posts: 1,413 Join Date: Aug 2002 Location: Surrey Yeah typical, I have a flavour of the 2 other ones... I which I could manage to adapt the 916 R fittings instead of the 996 RS ones described here which are absolutely rubbish. Reply