 |
| | |||||||||||||||||||||||||||
| | Thread Tools | Display Modes |
| #9  17-Nov-2009, 22:18 | ||||
| ||||
| Quote:
For the Showas you have to buy the complete fork Bottom casting just as you do with the earlier Ohlins R&T forks with the side mounted caliper bolts, so I would expect them to cost a fair bit more, as I have the FG320 forks the lower part already allows for a range of different brackets to be fitted A few years ago I purchased some New AP Radial Calipers through Harris Performance with the intention of fitting them to 108mm Magnesium mounts on the bottom of a set of works RGV500 Ohlins forks I have, I spoke to Steve Harris at the Ally Pally Show and he popped around to the AP stand and sorted me a good Price. Since then they have only been used a couple of times and that was on Dallas's Ex Superstock 2004 Yam R1 Checkout the Desmo Due Paddock on Facebook  |
skidlids
, would have thought so as a pair to fit Showa forks are $900 + 
Threaded Mode