Quote:
| Originally Posted by antonye A good tip for removing pins is to get a plastic or metal tube that will just slide over the pin. Push this over the pin to remove and it will close the tabs in and you can remove it from the other side. A little bit of jiggling on the wire helps too! |
I usually use a tool akin to the one below for extracting pins, like the ones found in the circular connectors used on 748s to 998s for connecting the front loom, not to dissimilar to the Amphenol ones on our Turbo Molecular Vac pumps at work
Checkout the Desmo Due Paddock on Facebook 
skidlids
Threaded Mode