Registered Forum User
Big Twin
Bikes: 916SPS Ratbike + 749R Shed
Posts: 1,030
Join Date: Jun 2001
Location: West Sussex
Mood: Ugly girls (749) are more dirty.....
I fitted a Brembo RCS to my 996 recently with double banjo bolt - the existing brake hoses were fine however due to the position of the RCS brake line fitting (underneath the m/cyl) the head of the banjo bolt is very close to the fork leg - about 2mm clearance. I jiggled the standard bar around a bit but I may need to do a bit more jiggling.
Not sure about that e-bay adaptor - I wouldn't trust using an unknown make/material spec part on my brake system, but that's just my opinion.
Threaded Mode