Quote:
| Originally Posted by antonye Nope - it should sit around the outside of top ring, so you can see it when fitted. |
Many thanks for your quick reply! I thought my first refitting attempt definitively looked better than how he seal has sat for many years, down and around the O-ring, courtesy someone who serviced the bike for a previous owner. I think the abuse that seal has suffered must have made it easier to relocate over the edge of the filler cap, which I actually didn't find too difficult.
Quote:
| Originally Posted by antonye You're also missing the big O-ring which sits in the groove below the grub screws in your pic ... unless you've just not fitted it  |
Yes, not yet fitted in that photo. For the sake of completeness, here is another shot taken before I put the filler cap back on:
20-Apr-2012, 19:54 
Threaded Mode