Registered Forum User
Ducati Meccanica
Posts: 2,518
Join Date: Jul 2004
Location: hants
Mood: Found a CR250. Let the bone braking begin
ok its a poor pic but the round thing to the right of the bat is the starter relay. on the back of it there are two large connectors 8-10mm nuts and the bottom wire leads to the starter.
ignore the small connectors you mentioned that's what sends it the signal to get busy from the starter button.
Bridge the two large connectors. But again be careful it will spin up as soon as you cross them with the screw driver. if it turns over moor than it has been then bobs your uncle
[Edited on 10-1-2005 by keefer]
Threaded Mode