 29-Jan-2005, 00:47 | #9 |
| The cams were OK, which was surprising, though most of the rockers are only starting to go, but there were a couple that were really bad. There were about 3 that would have been OK, but I opted to have them all swapped with the rockers from the newer heads so that they were all of the same age / condition instead of risking the others going in a few months time. So I now have 2 sets of standard cams (or will have when I fetch the bits after it's all done) along with a pair of late model head cstings, valves etc (but no rockers  )How glad am I about buying those heads when I did. | |
Threaded Mode