Still got a slight problem, this system came with the plugs already connected I think it has been fitted before, the colour coded sleeves have been removed so it is making it difficult to follow the wiring diagram we have. We have connected the loom to the fuel pump and we know where the wires for the micro switch and the indicators ect go, but we have one three pin plug left over that we can not work out, that alarm works but it does not arm itself after 30 secs, which indicates it is not sensing anything from the ignition switch wiring, we have tried the connect on left that comes out of the side stand and this does not work, any suggestions.
Stu
27-Feb-2005, 16:26 
Hybrid Mode
