Hi guys. I've been following this thread with interest as I have just had my forks and suspension rebuilt by Maxton and thought I should set up the "ride height" correctly at the same time
The Haynes manual says that the setting for the ride height adjuster is 261mm and states that Ducati recommend it should never be greater than 261mm !!!!! so that's what I have set it to.
The section8superbike site gives a dimension of 604mm from the top of the sprocket carrier nut to the centre of the top exhaust mount bolt.
The measurment on mine is about 560mm. Can this be right? and should I wind out the adjustment to obtain that 604mm reading????
Bike is a 98 748BIP by the way
Any suggestions gratefully received.
Threaded Mode