Ducati Sporting Club UK > DesmoDue Race Series > DesmoDue - General Questions and Chat > My season almost over.. " sob "

[Jools]

Phil,

Sorry to hear that mate. As Maclad says eBay could be your friend

http://cgi.ebay.co.uk/ws/eBayISAPI.d...9912 700&rd=1

[skidlids]

Phil you have a U2U

[AK]

Phil, Alan says he will check out the other engine in the garge tonight & see if he can salvage anything from it.
He says dont hold your breath (its been sitting there for 2 years in a box) but its worth a check.

C

mate, sorry to hear it .. good luck, but somehow I reckon the DSC collective efforts will dee you on the grid no probs ....... chin up mate ....

[fil2]

Originally posted by CK and AK
Phil, Alan says he will check out the other engine in the garge tonight & see if he can salvage anything from it.
He says dont hold your breath (its been sitting there for 2 years in a box) but its worth a check.

C

Thanks alot.........

phil

[phoenix n max]

Oh thats bad sorry to hear it. Hopefully something can be sorted for you.

[AK]

Phil, sorry - the boxed engine aint going to help out its a bit too young for yours

Al says have you tried Jim at Bike Enders?

C

[Glyn]

gutted phil
need to sort this one out asap

hope you get a lucky break on this
id offer to help but don't know what i can do for you
lrt us know though mate if there is owt

id go for a tenner name on bike fairing

by the time you've got enough for an engine you might need bigger fairings though

good luck getting it sorted

[Rattler]

tough break fella - you've got a U2U

Tim

[yeti]

Phil, I know it's a bit basic but is there enough good metal left to re-weld the flywheel to the crank so at least you can get something out of the engine, or has the weld failure trashed the lot?

I know an aircraft standard welder who could probably do the job as a freebie if I asked.