the mirrirs are only held on by one bolt, it sits in the middle of the 3, the 2 on either side are locating bolts.
The upper fairing is only a few screws.
There are the 2 sitting aboce the front mudguard,under the air ducts. then you have 1 either side of the air intakes.
That is pretty much it, i really would'nt bother trying to fit it over the existing light assembly though (mission impossible)
For a really good fit you would have to remove the lights, which means buying a race screen brace and re-attatching the fuse box,clocks etc...
I saw that and bought a 'race' fairing from Ducati9 with the headlight cut outs.
Was not cheap at £500 but nearly as good as road originals.
To be honest, if you dropped it severly enough to wreck your headlights on a 749, you are looking at a near total loss anyway. It would have to be a barrel roll 'end over end' to damage them.
Hope this helps...see my finished pics (gloss black 749) for what it can look like once all done.
Threaded Mode