MotoGP God
Posts: 18,275
Join Date: Apr 2002
Location: Oxford
Mood: Its ONLY a Bike Club
It is close Jon, in the picture there is 95mm between the fork dust seal and the casting on the bottom of the fork leg. Between the fairing and the mudgaurd there is only 75mm but I currently have 20mm of fork protruding.
I have not measured the static sag yet but the front does feel a bit soft, I know with the top of the forks flush with the top yoke I will be just about OK, but I do hope to improve on set up to give a little bit more adjustment/clearance. failing that I can re-jig my front bracket to gain a bit more clearance.
skidlids
Threaded Mode