Quote:
Originally posted by tony h
yeah 19mm but thats after increasing preload but now its to hard & need to back it off a bit , compression & rebound feel good just need to soften it up but dont no how far till they bottom,do run quite high rear ride hight (how i like it) which aint gonna help much? |
Preload only really affects your sag. Which should be around 35mm
Try setting sag first, then adjusting (upping) compression damping a bit to see how that affects the forks bottoming.
Could be your valves are shot, oil weights wrong (too light) or a combination of the two.
Threaded Mode