Croft DSC Yorks Region 25th April - Page 2

Ray · 24-Mar-2005, 15:39

Felix,

There is also a deal for £79 for the 7th of April. with 100%. I couldn't resist and got booked in.

I take you're not racing at Croft 2/3 April? That takes the pressure off Mr Weeks!! Not that he stood a chance on yer home patch anyway!! You'll be relying on the hairdresser and the pumber to see him off!!
No divided loyalties now if you're not racing though and I can help Weeksy with a relatively clear concience!!

I'm off up to watch anyway on the Sunday, a Yorks region trip out.

Frank,

I'll add you to the Yorks region e-mail list, You might be on there already as some addresses have been bouncing back, I'll check it out.

Ray.

Old Yella · 26-Mar-2005, 10:31

I will be booking for the 7th hopefully today or Monday Ray.

I have sorted the clutch slave cylinder that went at Oulton on wednesday but have to find this oil leak the bike seems to have sprung, looks like another day in the garage

You spoke to MM about this one?

Felix · 26-Mar-2005, 10:49

Gis a shout if you need a hand in the garage.

Old Yella · 26-Mar-2005, 11:10

You booking this one then Felix?

Be good to see you again mate.

Thanks for the offer but hope to find a weeping connection or something simple like that and sort it asap.

Ducati Leeds say Italy is shut for Easter now so no chance of getting parts sent over if anyone needs any!

Felix · 26-Mar-2005, 11:14

Too early to say about booking the trackday. What part do you need? Might have something laying about.

Old Yella · 27-Mar-2005, 15:28

Felix
I think I will need the seal and o-rings and the clutch cover gasket as the gasket is weeping badly and I might as well change the o-rings and seal while the covers off.

Just got the tool to get the clutch off from Jasp, cheers mate, so will be getting dirty again after lunch.

Felix · 27-Mar-2005, 16:51

The clutch cover gasket is only a spacer really. No oil should be on the inside either. Might have the o-rings but unlikely the seal. Do you need to pull the clutch side engine cover?

Old Yella · 27-Mar-2005, 17:30

It is the clutch housing that I have to take off as thats where the leak is not the little cover.

I need the tool now though as the one I got from Jasp dont work.

Dont suppose you have a clutch holding tool I can lend for a day or two.

Felix · 27-Mar-2005, 18:48

Yeah I do, but oohh it's gonna cost ya!

U2U your phone number.

[Edited on 27-3-2005 by Felix]

Old Yella · 27-Mar-2005, 22:05

Felix
Thanks for the offer mate but I am picking one up from a local guy in the morning, hopefully he has the o-rings I need too

Cheers for the offer anyway.

Bikes looking nice in the pic, you are racing next sunday at croft aren't you???

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode
Postbit Selector
		Use Vertical Postbit

26-Mar-2005, 10:49	#13
Felix Registered Forum User Ducati Meccanica Posts: 2,467 Join Date: Dec 2001 Location: North Yorkshire Mood: Is 112 dB loud enough?? What?? Gis a shout if you need a hand in the garage. Reply

26-Mar-2005, 11:14	#15
Felix Registered Forum User Ducati Meccanica Posts: 2,467 Join Date: Dec 2001 Location: North Yorkshire Mood: Is 112 dB loud enough?? What?? Too early to say about booking the trackday. What part do you need? Might have something laying about. Reply

27-Mar-2005, 16:51	#17
Felix Registered Forum User Ducati Meccanica Posts: 2,467 Join Date: Dec 2001 Location: North Yorkshire Mood: Is 112 dB loud enough?? What?? The clutch cover gasket is only a spacer really. No oil should be on the inside either. Might have the o-rings but unlikely the seal. Do you need to pull the clutch side engine cover? Reply

27-Mar-2005, 18:48	#19
Felix Registered Forum User Ducati Meccanica Posts: 2,467 Join Date: Dec 2001 Location: North Yorkshire Mood: Is 112 dB loud enough?? What?? Yeah I do, but oohh it's gonna cost ya! U2U your phone number. [Edited on 27-3-2005 by Felix] Reply