Don't have any pics but I've just done it and found it relatively easy (which means it must be very easy!) As you say it's pretty much step-by-step, remove fairing, get the front end supported(I have an engine stand), remove guard, wheel, forks etc. Ashamed to say I used a mallet and substantial screwdriver to loosen C-ring but managed not to mark it. You might want to mark where your forks are in the yokes before dropping them out, and take a note of the order that locking nut, washers etc come out in.
Haynes is okay as a guide for this though from memory the pics aren't particularly instructive.
07-Apr-2005, 11:49 
Threaded Mode