Ducati Sporting Club UK > Model Specific - Discussion, Technical Problems and Help > 999 / 749 > Oil Cooler recall

[HW]

Originally posted by KeefyB
Yep some of the early KTM oil coolers were replaced under the recall.Some were swapped for another KTM item others for a Toyo.
I seem to remember the problem was where the oil pipe unions connect.If the pipe entry spigot is welded onto the cooler it should be ok.Some were friction fit,pushed in.
There were one or two threads on the subject,try the search option.
It takes a dealer around 30secs to check it,if you're worried.

Ta. I'll try a search. As far as I am concerned it should have been replaced whilst on service in Oct last year. However, I noticed it is still a KTM unit so I am now not sure whether it was or not. I could go and ask the dealer whether it was done, but I wouldn't want then to think I didn't trust them to do it because they have never given me any reason to think they wouldn't have. I guess I was just surprised to see it was still a KTM.

I'll go and look for welds ...