Registered Forum User
Ducati Meccanica
Bikes: R1200RT F800GS. Hopefully another Ducati soon
Posts: 2,526
Join Date: Apr 2005
Location: Salisbury
I rounded off the inside hex of a bolt tonight luckily on the bracket that holds the pannier frame on. I removed it together with the A bracket that it was bolted to drilled a small hole right through the bolt then used a stud extractor. I was relieved to see the little bar steward come out. I would like to thank 3X for using about 300 million newton metres to tighten up such a poxy small screw. Good luck, Im sure Halfords sell stud extractors.
Threaded Mode